Filter
Top Products
187
Caution:
Do not directly edit the CSV file.
If edited, the test run check sheet creation tool may not function properly.
11.5.2 Test Run for the Charge Function Information CSV Output
Output the system configuration and various settings of the charge system (basic charge, PLC (or PI controller)
charge, RS-485 charge) to a CSV file.
(This function is not available if the Charge function is not available/not in use.)
How to Output a CSV File
The CSV file can only be output from the “Initial Screen”.
Begin from the “Initial Screen”.
[Instructions]
1) From the menu bar, select [Tool] – [System
information CSV output] – [Test run for the charge
function].
* This cannot be selected if the Charge function is not
available.
2) Enter the name of the export file.
Click the [Select] button to browse the output folder.
3) Click the [Output] button.
When the [Output] button is clicked, the CSV file is output.
When the [Cancel] button is clicked, the setting is canceled and returns to the Initial Screen.