Filter
Top Products
85
8.11.4 Creation of a sub screen plane view (Step 3)
Follow these steps to create a floor plane for each floor. This floor plane is used in air conditioning
operation and supervision for each floor. If not displaying a floor plane, it is not necessary to create
one. (The background is white.)
Create a floor plane for each floor
[Procedure]
1) Click the Base [Change] button.
In the Floor Plan Settings window, click the [Change]
button to edit the base plane. The paint brush appears.
A base plane serves as a basis for the whole floor screen.
To create the floor screen for each whole floor, copy the
base drawing and modify it to suit each floor.
2) Create a base plane.
Create a base plane with the paint brush.
* For details, see the Windows users guide.
3) Exit Paint Brush Mode.
Click the file menu and select the Exit Paint Brush
option. Select “Yes” on “the save confirmation
screen”.
4) Select a floor using the “
/
” button
Use the “
/
” button to select the floor to be
modified.
5) Click the Base [Copy] button.
To apply the created base drawing to the selected
floor, click the Base [Copy] button. It is not necessary
to click the Base Copy button when creating a new
floor plane.
6) Click the [Change] button
To create or edit a floor plane for the selected floor,
click the [Change] button. The paint brush starts up,
and the floor plane can be edited.
7) Create a floor plane.
Use the paint brush to edit the floor plane of the
selected floor.
8) Exit the paint brush.
Click the paint brush File menu and select the Exit Paint Brush option.
9) Click [OK] button.
After a floor plane has been created, click the [OK] button
*When the [Cancel] button is clicked, this setting is terminated to return to the initial windows.
Maintenance Tip
• When Paint Brush Mode is activated, the file
name and graphic size is set and should no
t
be changed. If changed, the floor plane may
not display correctly.
(*Base plane for whole floor: For 4 sections
Name: BaseFloor1000.bmp Size: W174 H100
Base plane for whole floor: For 6 sections
Name: BaseFloor2000.bmp Size: W261 H100)
Base plan
e
Floor plan
e
Floor selection
Paint Brush window (initial state)
Creation of a plane view screen
Note
• The floor layout that was created for the TG-2000A cannot used with the AG-150A. Likewise, the floo
r
layout that was created for AG-150A cannot be used with the TG-2000A.