Filter
Top Products
69
The information possessed by the integrated software is compared with the AG-150A/G-50A
refrigerant information when the integrated centralized control software TG-2000A starts to display
the coincidence or error message of caution in the event of no reception when this refrigerant
system setting change screen is selected.
8.7.5 Set-up of group (Step 4)
It is possible to confirm and change the group information of the indoor unit and ventilation unit
within each AG-150A/G-50A.
Confirm the group information.
[Procedure]
1) Click the “
/
” button to select AG-150A/G-50A No.
Select the AG-150A/G-50A No. to be assigned using the “
/
” buttons.
2) Select the [OK] button after confirming the group information.
If it is not necessary to change or correct the information of each AG-150A/G-50A when it is
checked, click the [OK] button.
* When the [Cancel] button is clicked, this setting is terminated to return to the initial window.
Change the group information.
[Procedure]
1) Click the “
/
” button to select AG-150A/G-50A No.
Select the AG-150A/G-50A No. to be assigned using the “
/
” buttons.
2) Delete/add the unit icon.
Unit icon deletion: Click the unit icon to be deleted.
Unit icon addition: Click the unit icon to be added, from the Unconnected indoor unit and
Unconnected remote controller columns to set it to the selected state.
(The symbol of the selected unit is displayed by the pointer.)
When the group column to be added is clicked, the unit icon is displayed.
3) Select the [OK] button.
After fully completing the group information changes, click the [OK] button.
AG-150/G-50A Selection:
Select the AG-150A/G-50A No.
Group information:
Displays the group configuration
of the indoor unit or ventilation
unit.
Unconnected indoor unit:
Displays the indoor unit, LOSSNAY
(IC, KIC, AIC, LC, DC) not set for
the group.
Unconnected remote
Controller:
Displays the SC, GR, SR, AN,
and RC which can be set for
the group.
Group No.:
Displays the group No.
Number of connected
AG-150A/G-50A units:
Indicates the number of AG-150A/
G-50A units connected.