Filter
Top Products
REVISION
*The manual number is given on the bottom left of the back cover.
Print Data *Manual Number Revision
Mar. 2012 SH(NA)030106-A First edition
Jun. 2012
SH(NA)030106-B 4. Additional instructions
(2) Wiring
4. Additional instructions
(3) Test run and adjustment
COMPLIANCE WITH CE
MARKING
COMPLIANCE WITH
UL/CSA STANDARD
COMPLIANCE WITH KC
MARK
Section 1.2
Section 1.3
Section 1.5
Section 1.7.1
Chapter 2
Section 2.5
Section 2.6
Chapter 3
Section 3.1
Section 3.1.1 (1)
Section 3.1.1 (2)
Section 3.1.1 (3)
Section 3.1.1 (4)
Section 3.2.1
Section 3.2.2
Section 3.3.1
Section 3.3.3 (2) (a)
Section 3.5.2 (2)
Section 3.6.2 (1)
Section 3.7.1 (3)
Section 3.8.2 (1)
Section 3.8.2 (2)
Section 3.8.3 (1)
Section 3.8.3 (2)
Section 3.10.2 (1) (a)
Section 4.1.2 (1) (b) 4)
Section 4.3.3 (1)
Section 4.5.2 (1) (b)
Section 5.1
Section 5.1.1
Section 5.1.6
Section 5.2.1
Section 5.2.3
Section 5.2.4
Section 5.2.5
Section 5.2.6
Chapter 6
Chapter 7
The sentences are added.
The sentences are added.
The reference is changed.
The reference is changed.
Added.
The diagram is changed.
The table and Note are changed.
The sentences of the fully closed loop system and drive recorder are
changed.
The diagram is changed.
CAUTION is changed.
POINT is changed to CAUTION.
The explanation of relay lifetime is changed.
The sentences are added to CAUTION.
The sentences are added to CAUTION.
Note 12 is added.
Note 11 is added.
Note 11 is added.
Note 11 is added.
Note 11 is added.
Note 17 is added.
Note 17 is added.
The sentences of N- are changed.
The ferrule is added.
The sentences of INP (In-position) are added.
CLDS (During fully closed loop control) is added.
The sentences are added.
The sentences are added.
The sentences are changed.
The sentences are added.
The sentences are added.
The sentences are added.
The sentences are changed.
Added.
The diagram is changed.
Note is added. [AL. 20 Encoder normal communication error 1 (ABZ
input)] in the table is deleted.
POINT is changed and Note is deleted.
PA25 is changed from "For manufacturer setting".
PF06 and PF12 are changed from "For manufacturer setting".
The sentences are added to PA01 and PA25 is added.
The sentences of PC01 are changed and sentences are added to
PC03.
The table of PD07 is changed.
The sentences are added to PE08.
PF06 and PF12 are added.
The sentences in POINT are changed.
The sentences in POINT are changed.