Filter
Top Products
1. FUNCTIONS AND CONFIGURATION
1 - 2
Table 1.1 Connectors to connect from external encoders
Operation
mode
External encoder
communication
method
Connector
MR-J4-_B_ MR-J4-_B_-RJ
Linear servo
motor system
Two-wire type
CN2 (Note 1) CN2 (Note 1)
Four-wire type
A/B/Z-phase
differential output
method
CN2L (Note 6)
Fully closed
loop system
Two-wire type
CN2
(Note 2, 3, 4)
CN2L
Four-wire type
A/B/Z-phase
differential output
method
Scale
measurement
function
Two-wire type
CN2
(Note 2, 3, 5)
CN2L (Note 5)
Four-wire type
A/B/Z-phase
differential output
method
Note 1. The MR-J4THCBL03M branch cable is necessary.
2. The MR-J4FCCBL03M branch cable is necessary.
3. When the communication method of the servo motor encoder is four-wire type,
MR-J4-_B_ cannot be used. Use an MR-J4-_B_-RJ.
4. This is used with servo amplifiers with software version A3 or later.
5. This is used with servo amplifiers with software version A8 or later.
6. Connect a thermistor to CN2.