Filter
Top Products
17. APPLICATION OF FUNCTIONS
17 - 11
(2) Changing the mode to "J3 compatibility mode" by using the application "MR-J4(W)-B mode selection".
You can switch the servo amplifier's mode to "J3 compatibility mode" beforehand with the built-in
application software "MR-J4(W)-B mode selection" of MR Configurator2. Use it for a solution when it is
difficult to reset many times with your "Reset required" controller such as "QD74MH_".
The application "MR-J4(W)-B mode selection" has no expiration date.
Select "Change Mode".
Select "J3 Compatibility Mode".
Select "Operation Mode" for each axis
.