Filter
Top Products
17. APPLICATION OF FUNCTIONS
17 - 15
2) Select "MR-J3-B extension function" of model selection in the "New" window and click "OK". The
"Extension function change" window will be displayed.
3) Click "Change to MR-J3-B extension function" in the "Extension function change" window and
click "OK". Now, you can set the extension control 2 parameters ([Pr. PX_ _ ]).
(b) Setting to enable the J3 extension function
To enable the J3 extension function, set [Pr. PX01] to "_ _ _ 1".
000
[Pr. PX01]
J3 extension function selectio
n
0: Disabled
1: Enabled