Filter
Top Products
APPENDIX
App. - 40
2) 3) 4) 1)
App. 8 Two-wire type encoder cable for HG-MR/HG-KR
Use a two-wire type encoder cable for the fully closed loop control by the MR-J4-_B_ servo amplifiers.
For MR-EKCBL_M-_ encoder cables for HG-MR and HG-KR, up to 20 m cables are two-wire type.
Therefore, when you need a longer encoder cable of two-wire type than 20 m, fabricate one using MR-
ECNM connector set. Use the internal wiring diagram in the section to fabricate a cable up to 50 m.
App. 8.1 Configuration diagram
Servo amplifier
CN2
Fabricate a two-wire typ
e
encoder cable.
CN2 MOTOR
SCALE
Servo motor
HG-KR
HG-MR
Servo motor
HG-KR
HG-MR
For driving
For load-side encoder