Filter
Top Products
17. APPLICATION OF FUNCTIONS
17 - 14
The following shows how to use the J3 extension function.
(1) Settings of J3 extension function
POINT
To set the J3 extension function, connect a personal computer with MR
Configurator2 of software version 1.25B or later to the servo amplifier with USB
cable.
The extension control 2 parameters ([Pr. PX_ _ ]) cannot be set from a
controller.
To use the J3 the extension function, enable the setting of the extension control 2 parameters ([Pr. PX_
_ ]). Set as follows using MR Configurator2.
(a) Setting to enable the extension control 2 parameters ([Pr. PX_ _ ])
1) Open the "Project" menu and click "New" in MR Configurator2. The "New" window will be
displayed.