Filter
Top Products
17. APPLICATION OF FUNCTIONS
17 - 27
(b) Display transition and operation procedure of one-touch tuning
1) Response mode selection
Select a response mode from 3 modes in the one-touch tuning window of MR Configurator2.
Response mode Explanation
High mode This mode is for high rigid system.
Basic mode This mode is for standard system.
Low mode This mode is for low rigid system.
Refer to the following table for selecting a response mode.
Response
mode
Response
Machine characteristic
Low mode Basic mode High mode Guideline of corresponding machine
Low response
General machine
tool conveyor
Arm robot
Precision working
machine
Inserter
Mounter
Bonder
High response