Filter
Top Products
Bosch Security Systems | 2011-02
2011-02 | Installation and User Instructions | 2 | Introduction en | 75
1 About this manual
1.1 Purpose of this manual
This manual supplies an engineer with the information
required to install a Praesideo system.
Praesideo recognizes the following authorization levels:
• Administrator
Typically a person who is responsible for ensuring
that the system is properly maintained and repaired
so as to continue to operate as specified.
• Installer
Typically an installation engineer who installs the
system.
• User
Typically an end-user of the system.
1.2 Intended audience
This manual has been written with administrators and
installers in mind. To be able to make the right
judgements in error situations, it is preferred that you
have followed a general Praesideo training. User
instructions for the end-users must be provided by the
administrator(s) and installer(s).
Sections in this manual that carry a Caution, Warning or
Danger sign describe servicing instructions for use by
qualified service personnel only. To reduce the risk of
electric shock do not perform any servicing other than
that contained in the operating instructions unless you
are qualified to do so.
1.3 Related documentation
The following related documents are available:
• Release notes on the DVD
• Commercial Brochure on the website
(www.boschsecurity.com)
• Data Brochure on the website
(www.boschsecurity.com)
• Architect’s & Engineer’s Specification on the website
(www.boschsecurity.com)
1.4 Alerts
In this manual, four types of alerts are used. The alert
type is closely related to the effect that may be caused
when it is not observed.
These alerts - from least severe effect to most severe
effect - are:
• Note
Alert containing additional information. Usually, not
observing a note alert does not result in damage to
the equipment or personal injuries.
• Caution
The equipment can be damaged if the alert is not
being observed.
• Warning
Persons can be (severely) injured or the equipment
can be seriously damaged if the alert is not being
observed.
• Danger
Not observing the alert can result in death.
1.5 Signs
Except for note alerts, the nature of the effect that can
be caused when the alert is not observed, is indicated
using a sign. For note alerts, the sign provides more
information about the note itself. In this manual, the
following signs are used in combination:
Note
General sign for notes.
Note
Consult the indicated source of information.
Caution, Warning, Danger
General sign for cautions, warnings and
dangers.
Caution, Warning, Danger
Risk of electric shock.
Caution, Warning, Danger
Risk for electrostatic discharges.