Filter
Top Products
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 3 | Control Equipment en | 101
5.6.10 View MAC address
The MAC Address menu item can be used to view the
MAC address of the network controller. The MAC
address is a unique address that is factory-set and cannot
be changed. Within networks, it can be used to get
access to the unit.
5.6.11 View version information
The Serial Number, HW Version, SW version and
FW version menu items are used to obtain version
information about the network controller.
table 5.15: MAC address menu item
Menu item Value (read-only) Description
2C MAC address e.g. 000463-004209 Show the MAC address of the network controller.
table 5.16: Version information menu items
Menu item Value (read-only) Description
2D Serial Number e.g. 11.0.00 8A4 Shows the hexadecimal serial number.
2E HW Version e.g. 15.0 0 Shows the hardware version.
2F SW Version e.g. 2.10.1175 Shows the version number of the Praesideo software.
2G FW Version e.g. 3.00.1419 Shows the version number of the firmware. This must be the same
for all units in the system.