Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 3 | Control Equipment en | 109
See figure 6.4 for details about the audio output sockets.
6.3.5 Connecting control inputs
The audio expander has 8 control inputs. The control
inputs can receive signals from third party equipment
that must trigger actions in the Praesideo system. The
control inputs can be configured to act on contact make
or on contact break (see section 43.5). It is also possible
to supervise the cables for short-circuits and open
connections (see figure 6.5 and figure 6.6). Whether a
control input is actually supervised or not is defined in
the configuration.
figure 6.4: Audio output sockets
table 6.3: Audio output socket details
Pin Socket Definition Description
1 XLR
(male)
Xternal Shield/ground
2 Live Positive
3 Return Negative
4 Cinch Right Right channel out
5 Left Left channel out
Audio Out
1
3
2
5
4
figure 6.5: Supervised control input
figure 6.6: Non-supervised control input
Warning
Do not connect DC or AC signals to the control
inputs, otherwise the input circuit may be
damaged. Only use voltage-free contacts.
Note
Do not combine control input wires of multiple
control inputs (e.g. do not use a common return
wire).
Control In
12345678
10kΩ
10kΩ
Control In
12345678