Filter
Top Products
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 9 | System Configuration en | 398
47.3.27 Switch trigger
The Switch trigger action is intended for activating Switch
output control outputs or Switch output keypad keys (see
section 47.3.28). See figure 47.34 for an overview of the
Action programming page for a Switch trigger key.
• Action type - Sets the action type.
• Priority - Sets the priority of the activated output.
• Available outputs - Shows the available Switch
output control outputs and keypad keys.
• Add/Remove buttons - Using the > and <
buttons, selected outputs can be added to or
removed from Assigned outputs.
• Assigned outputs - Shows the Switch output
control outputs and keypad keys that have been
assigned to the key.
47.3.28 Switch output
The Switch output action is intended for control outputs
and call station keypads or call station keypad kits. The
key/input itself is not used by this action; only the
indicator/output attached to the key is activated. The
Switch output action is activated using a Switch trigger
action (see section 47.3.27). See figure 47.35 for the
Action programming page for a Switch output key.
47.3.29 Zone active output
The Zone active output action is intended for control
outputs and call station keypads or call station keypad
kits. The key/input itself is not used by this action; only
the indicator/output attached to the key is activated. A
Zone active output key can be assigned to a zone (see
section 45.2) and becomes active when a call or BGM is
sent to the zone. See figure 47.36 for an overview of the
Action programming page for a Zone active output key.
47.3.30 Volume override output
The Volume override output action is intended for control
outputs and call station keypads or call station keypad
kits. The key/input itself is not used by this action; only
the indicator/output attached to the key is activated. A
Note
This action can also be assigned to control
inputs.
figure 47.34: Switch trigger key
figure 47.35: Switch output key
figure 47.36: Zone active output key