Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | EN60849: 1998 en | 23
EN60849 - 6. Installation requirements
Requirement Compliance Signature
The system shall be installed in accordance with
IEC60364 or with mandatory national or local
standards.
Responsibility of the installer.
If the emergency sound system forms part of an
emergency detection and/or alarm system, the cabling
shall meet the requirements of mandatory national or
local, emergency and/or alarm system standards.
Where the application specifically excludes detection
and/or alarm, the cabling shall be of a standard suitable
for the application.
Responsibility of the installer.
Precautions shall be taken to prevent the spread of
hazardous effects via the wiring routes.
Responsibility of the installer.
When a sound system for emergency purposes is
installed in combination with an emergency detection
system, the installation standards for the sound system
shall comply as far as is applicable with the standards
required for that detection system.
Responsibility of the installer.
When additions and/or modifications are made to a
non-compliant system the existing system may require
to be upgraded to meet this standard. In all cases the
additions and/or modifications shall meet this standard.
Responsibility of the installer.