Filter
Top Products
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 8 | Software en | 311
35 PRS-SW Praesideo
Software DVD
35.1 Introduction
The PRS-SW Praesideo Software DVD contains the
Praesideo system software as well as the manuals and
freeware audio tools.
35.2 Starting the DVD
Put the PRS-SW Praesideo Software DVD in the DVD
drive of the configuration PC. If autorun is enabled for
the DVD drive, a screen similar to the one in figure 35.1
is opened in the web browser program. If the DVD
does not start automatically:
1Go to Start > Run.
2Enter X:\setup.exe. (Replace X with the character of
the DVD drive).
35.3 Contents
35.3.1 Introduction
The software on the Praesideo DVD is divided in three
categories:
• Mandatory packages (see chapter 36).
• Recommended packages (see chapter 37).
• Optional packages (see chapter 38).
36 Mandatory packages
36.1 Introduction
The mandatory software installation procedure consists
of the following steps:
1 Installation of all mandatory software packages on
the configuration PC (see section 36.2).
2 Establishing a connection between the configuration
PC and the network controller (see section 36.3).
3 Transferring system files from the configuration PC
to the network controller (see section 36.4).
4 Installing firmware on the network controller and
other system units (see section 36.5).
36.2 Installation on PC
36.2.1 Introduction
The following mandatory software packages must be
installed on the configuration PC:
• Praesideo core software (see section 36.2.2).
• SVG viewer (see section 36.2.3).
• Windows script (see section 36.3)
figure 35.1: Software installation page
figure 36.1: Mandatory software packages page