Filter
Top Products
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 9 | System Configuration en | 409
50.7 Check configuration
The Configuration page in the Diagnose section can be
used to check the system configuration for
inconsistencies. Inconsistencies can cause strange or
unexpected system behavior.
The Configuration page shows the following errors:
• Outputs that are assigned to more than one zone.
• Inputs that are assigned to multiple BGM channels.
• Zones and zone groups that are assigned to multiple
BGM channels.
• Control outputs (other than configured as switch
outputs) that are assigned to a switch trigger input, a
call activation input, a PTT input or a call start input.
• Control outputs (other than configured as zone active
or volume override output outputs) that are assigned to
a zone.
• Main amplifiers that are assigned to more than one
spare amplifier.
• Main and spare amplifiers are not compatible types.
The web interface prevents most inconsistencies from
occurring by refusing to accept incorrect user data
during configuration, but some inconsistencies can still
occur. The Configuration page will display but not solve
any remaining inconsistencies. The installer should
modify the configuration.
figure 50.3: Check configuration page