Filter
Top Products
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 9 | System Configuration en | 397
47.3.25 Back-up power mode
The Back-up power mode action is used to put the system
in the back-up power mode. In this mode, all calls
below a specified priority (see section 44.4) are aborted.
See figure 47.32 for an overview of the Action
programming page for a Back-up power mode key.
47.3.26 Synchronize time
The Synchronize time action is used to set the internal
clock of the network controller to the nearest minute to
synchronize the clock with a master. See figure 47.33 for
an overview of the Action programming page for a
Synchronize time key.
Note
This action can also be assigned to control
inputs.
figure 47.32: Back-up power mode key
Note
This action can also be assigned to control
inputs.
figure 47.33: Synchronize time key