Filter
Top Products
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 11 | Optional Software en | 448
56.5 Main window
56.5.1 Opening the main window
Proceed as follows:
1 Double click on the Logging Server icon (see figure
56.2). A screen similar to the one in figure 56.4
appears.
56.5.2 Status messages
The main window displays the status of the Logging
Server.
Note
When server authentication (see section 56.7.5)
is enabled, the Logging Server asks for a user
name and a password.
figure 56.4: Main window
Message:
The Logging Server is OK.
Description:
The Logging Server operates correctly.
Recommended action:
----
Message:
Logging Server has no connection with <system>
Description:
There is no connection with the specified system.
Recommended action:
Make sure that the specified system is running and
that the specified system has an Ethernet connection
with the Logging Server.
Message:
Network controller <system> refused connection due
to incorrect user name or password.
Description:
It is not possible to connect to the specified system,
because the network controller authentication failed.
Recommended action:
Make sure the specified system knows the user name
and password of the Logging Server (see section
56.7.5.3).
Message:
The Logging Server options are changed. Restart the
Logging Server to use the changed settings.
Description:
The configuration settings of the Logging Server were
changed. The changed settings are not used until the
Logging Server is restarted.
Recommended action:
Restart the Logging Server to use the new settings.