Filter
Top Products
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 3 | Control Equipment en | 102
5.7 Technical Data
5.7.1 Physical characteristics
5.7.2 Climate conditions
5.7.3 EMC and Safety
5.7.4 Mean time between failure
5.7.5 System bus
5.7.6 Power supply mains
5.7.7 Power supply battery
Dimensions (H x W x D):
88 x 483 x 400 mm (19" installation, with brackets,
360 mm depth behind the brackets, 40 mm in front of
the brackets)
92 x 440 x 400 mm (table-top, with feet)
Weight:
7 kg
Temp era tur e:
-5 to +55 °C (operating)
-20 to +70 °C (non-operating)
Relative humidity:
15 to 90%, non-condensing (operating)
5 to 95%, non-condensing (non-operating)
Air pressure:
600 to 1100 hPa
Electromagnetic compatibility:
E N55103-1/ FCC -47 part 15B
E N55103-2
EN50121-4
EN50130-4
(Compliancy to EN50130-4 requires an external mains
input filter, model Schaffner FN2080-6-06, for surge
immunity.)
Electrical safety:
IEC60065 (CB-scheme)
EN60065
Approvals:
CE marking
EN60849, EN54-16 and ISO7240-16
IEC60945
MTBF:
50,000 hours at +55 °C
(The MTBF doubles for every 10 °C decrease in
temperature.)
Connector (rear side):
Proprietary connector
Preferred cable:
LB B4416/xx
Maximum cable length:
50 m (per system bus connector)
Data signal interface
Plastic optical fiber
Network power supply:
2 x 55 W (at network output)
Connector (rear side):
IEC male power inlet with fuse holder
Preferred cable:
Mains cord meeting CE standard
Voltage selector (rear side)
115 V(AC)/230 V(AC)
Nominal input voltage range:
115 V (typical): 100 - 120 V(AC) at 50 - 60 Hz
230 V (typical): 220 - 240 V(AC) at 50 - 60 Hz
Input voltage limits:
115 V (typical): 90 - 132 V(AC) at 50 - 60 Hz
230 V (typical): 198 - 264 V(AC) at 50 - 60 Hz
On/Off switch:
Located at the rear
Power consumption:
14 W without network load,
160 W at maximum load
Connector (rear side):
2 pole for removable screw connector
Input voltage:
48 V(DC)
Input voltage range:
43 to 56 V(DC)
Power consumption:
14 W without network load,
160 W at maximum load