Filter
Top Products
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 11 | Optional Software en | 467
selected on expiry of the configured Timeout. A timeout
period between 10 s and 60 s can be selected. The
timeout timer is (re)started every time a predefined call
is selected or when a zone or zone group in the zone
selection pane is selected. While a selected predefined
call is being made, the timeout timer will not expire, but
it will expire 5 s after completion of the call. This allows
the user to quickly select the previous call again in case
something was forgotten. The timeout behavior is only
applicable to the Predefined call tab and is not influenced
by selecting the BGM tab for BGM control, nor by
BGM selections.
Selecting layouts per user is done in a similar way. The
order of the selected layouts in the list is the order of the
layout tabs in the PC Call Station Client view.
Additionally, you can give the user the authorization to
control BGM, to acknowledge and reset the emergency
state and to access other applications on the same PC
the PC Call Station Client is running on. In case this
access to other applications is disabled, the PC Call
Station Client will run full screen, the task bar will be
hidden and the application will try to run its main
window on top of other applications.
59.5.4.10 Configure PC Telephone Interface Client…
The general settings of the PC Telephone Interface Client,
that can be installed with the PC Call Server, can be
configured and managed via this menu. Even if the
PC Telephone Interface Client is not installed, this menu is
still available but can be ignored.
Select which country must be used as reference for the
telephone tones used. These tones will be based on what
is common for that country (busy tone, et cetera). If the
PC Telephone Interface Client is not installed this list is
empty.
Enter the VoIP extension number; this is the telephone
number that VoIP users should call to reach the
PC Telehone Interface Client. This extension has a
maximum length of 10 digits and may only contain
numbers. This VoIP extension number should match
the VoIP extension in the PSTN configuration. See
section 61.8.3.
Pressing Configure for the Zone (group) aliases brings up a
window (see figure 59.17) where numerical aliases can
be assigned to zones and zone groups. This way users
can call in to Praesideo, using a telephone, and select
zones or zone groups with the numeric keypad of the
telephone, even while the original zone and zone group
names are alphanumeric.
.
The list of available zones and zone groups shows all
zones and zone groups that are known to the PC Call
figure 59.15: Selection of predefined calls
figure 59.16: PC Telephone Interface Client
configuration
figure 59.17: Zone (group) alias configuration