Filter
Top Products
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 4 | Amplifiers en | 147
8.6.2 Navigate through the menu
Operating the menu is always a sequence of alternating
turns and pushes:
Turn the button to:
• Cycle through the menu items within a menu.
• Go to a settable option within a menu item (a
blinking cursor moves through the menu screen).
• Cycle through the available values for a settable
option (the value is blinking).
Push the button to:
• Confirm a chosen menu item (a blinking cursor
appears).
• Go to a sub-menu (the sub-menu item character
starts blinking).
• Confirm the selection of a settable option (the cursor
disappears, the option value starts blinking).
• Confirm a selected value for a settable option (the
value stops blinking, the cursor appears again).
Each menu is identified by a number or by a number
plus a character (see figure 8.19). The item identification
can be found at the start of the first line and is used to
navigate to and from the sub-menus. Most menu items
have one or more settable options. The value of an
option can be changed by selecting a value from a list of
available values.
To navigate through the status screens:
1 Turn the button to move through the status screens
(i.e. the Status and Menu ... screens).
To navigate through the main menu:
1 Navigate in the status screens to Menu....
2 Push the button to go to the main menu. The menu
item number starts blinking.
3 Turn to select another menu item number.
4 Push to confirm the selection.
To jump to a sub-menu:
1 Navigate in to an item with three dots (e.g. Setup...).
2 Push the button to go to the sub-menu. The
sub-menu item character starts blinking.
3 Turn to select another menu item number.
4 Push to confirm the selection.
To navigate through a sub-menu:
1 Turn the button to move the cursor to the sub-menu
item character.
2 Push the button. The item character and title starts
blinking.
3 Turn to select another sub-menu item character.
4 Push to confirm the selection.
To change option values:
1 Navigate to the applicable menu item.
2 Turn the button to move the cursor to the option
value you want to change.
3 Push the button to activate the option. The option
starts to blink.
4 Turn the button to select a new option value.
5 Push the button to confirm the new value.
The option value stops blinking.
6 Turn the button to move the cursor to another
settable option (when available) and repeat steps
3 to 5.
figure 8.19: Menu item screen elements
1 Monitoring
Input 1
main menu
item number
option value
main item
title