Filter
Top Products
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 6 | Installation Accessories en | 267
25.4 Installation
The network splitter can be attached to a wall or any
other flat surface using a bracket (see figure 25.7). The
distance (d) between the holes in the bracket is 40 mm.
Mounting of this bracket and the unit on a drywall sheet
construction requires screws with a minimum screw
length of 22 mm (7/8") and a minimum diameter of
2.5 mm (3/32"). Mounting was evaluated for use on a
drywall surface only.
25.5 Operation
Note
The pin numbers are also indicated on the inside
of the connector.
For detailed connector assembly instructions,
see appendix B.
Warning
For safety reasons, you must use a current
limited external power supply complying with
the 60065 standard for audio/video usage or
equivalent, with a maximum output current of
5A, or you must use an external fuse (5A max,
slow) in the wiring to the Kycon KPP-4P
connector.
For application in emergency sound systems in
Europe, the installer must use a power supply
with EN54-4 certification.
Caution
For USA: only use a power supply of the type
Mean Well PLN-30-24, PLN-30-36,
PLN-30-48, PLN-60-24, PLN-60-36,
PLN-60-48, PLN-100-24, PLN-100-36 or
PLN-100-48.
For CANADA: only use a power supply of the
type Mean Well PLN-30-24, PLN-30-36,
PLN-60-24, PLN-60-36, PLN-100-24 or
PLN-100-36.
Other types of power supply are not tested with
Praesideo and may cause harm.
figure 25.7: Installation
table 25.2: Status LED indications
Yellow
(Fault)
Green
(Power)
Status
Off Off No power
On Off No network or network fault
Off On Functioning correctly
d