Filter
Top Products
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 4 | Amplifiers en | 150
8.7.4 Main menu
The Menu ... item provides access to the main menu.
8.7.5 Set monitoring options
The Monitoring submenu is used to set which signal is
sent to the monitoring headphones. It can be one of the
audio outputs or no signal at all. It is not possible to set
the volume of the audio outputs on the monitoring
headphones. This means you always hear the audio
output at the monitoring headphones at the same
volume as it is broadcast.
8.7.6 View version information
The Serial Number, HW Version and SW Version
submenus are used to obtain version information about
the power amplifier.
table 8.8: Main menus
Menu item Description
1 Monitoring Go to the Monitoring submenu.
See section 8.7.5.
2 Setup Go to the Setup submenu. See
section 8.7.6 (and further).
table 8.9: Monitoring submenu
Menu item Option Value 1 Description
1 Monitoring Source:
- Output n Output nr:
1 to 8
The signal from audio output n is available
on the monitoring headphones output.
- Off* The monitoring headphones output is off.
table 8.10: Version information menu items
Menu item Value (read-only) Description
2A Serial Number e.g. 07.0.0025B Shows the hexadecimal serial number.
2B HW Version e.g. 01.01 Shows the hardware version.
2C FW Version e.g. 3.00.1419 Shows the version number of the firmware. This must be the same for
all units in the system.