Filter
Top Products
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 10 | Events en | 417
Event message:
Network connections reset to full optical power
Originator:
----
Extra information:
----
Description:
Logs the end of the half power mode of the optical
network.
Recommended action:
----
Event message:
System restarted
Originator:
Network controller that is started.
Extra information:
----
Description:
Logs the start-up of a network controller.
Recommended action:
----
Event message:
Unit connect
Originator:
Unit that connects.
Extra information:
This general event is not applicable to open interface
clients.
Description:
Logs the connection of a unit to the system.
Recommended action:
----
Event message:
User login
Originator:
Unit on which the log-in occurred.
Extra information:
----
Description:
Logs the user ID of the user who has logged in to the
system via a numeric keypad with Access control.
Recommended action:
----
Event message:
User login failed
Originator:
Unit on which the log-in occurred.
Extra information:
----
Description:
Logs when a log-in attempt via a numeric keypad with
Access control has failed.
Recommended action:
----
Event message:
User logout
Originator:
Unit on which the log-out occurred.
Extra information:
----
Description:
Logs the user ID of the user who has logged out from
the system via a numeric keypad with Access control.
Recommended action:
----