Filter
Top Products
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 11 | Optional Software en | 469
codes of the users, with Direct access disabled. If Direct
access is enabled, then a TI user (Telephone Interface
user) must be selected from the list of configured users.
The predefined calls associated with this user are then
valid for all users with direct access to the system via
this SIP account. See section 59.5.4.11.
59.5.4.13 Configure Time Synchronisation…
In this item you can enable (default) or disable time
synchronization of the connected and configured
network controllers. It uses the PC Call Server time as
master.
Pressing the Synchronize now button (only enabled when
the client has a connection with the PC Call Server) will
result in an immediate time synchronization of all
connected network controllers.
59.5.4.14 Change Configuration Password…
This item allows you to change the configuration
password. After installation of the PC Call Server the
default password is empty. The maximum length of the
password is 16 characters, there is no minimum. You
should fill in the old password and a new password,
which has to be confirmed. This option is not available
when working offline.
59.5.4.15 Enter License Key…
In this item you can enter the license key to enable the
full functionality of the application. This option is not
available when working offline.
The license key identifies the number of network
controllers that can be controlled and the major
software version number of the PC Call Server (that
matches the Praesideo core release).
The license key window shows the current software
version number ("-" when no valid key has been entered
in the past), the number of licensed network controllers
("0" when no valid key has been entered in the past) and
the serial number of the dongle that is currently
attached to the PC ("-"when no valid dongle is attached).
You can get the required license key from the Bosch
Security Systems registration website after registration of
the PC Call Server authorization number, the
authorization number for additional network controllers
(if the system contains more than one network
controller), the authorization number of the PC Call
Station Client and/or the authorization number of the PC
Telephone Interface Client. This key is linked to the unique
serial number of the dongle that comes with the PC Call
Server. That number is shown in this window and needs
to be entered on the registration website to make the
link.
The application is only fully functional if the correct
dongle is present in a USB port of the Call Server PC.
Unlicensed PC Call Station Clients can only monitor
ongoing calls in the system without the possibility to
make calls. If the dongle is removed from a licensed
system, a count down timer starts, and calls cannot be
started anymore from a PC Call Station Client after that
time. An unlicensed PC Telephone Interface Client can not
be used to make calls using a telephone. It will only give
a (voice) response to the caller that there is no valid
license.
figure 59.20: Configure time synchronization
figure 59.21: Change configuration password
figure 59.22: Enter license key