Filter
Top Products
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 6 | Installation Accessories en | 290
Where applicable, the way in which the connectors
must be assembled on both sides of the cables is shown
in the figures. Proceed as follows:
26 Check if the copper wires and the plastic optical
fibers have been positioned in the correct way (see
figure 29.31).
27 Put the ferrules in the mounting block (see
figure 29.32)
28 Put the socket contacts in the mounting block (see
figure 29.33). In one of the connectors attached to a
type A cable, the red and brown copper wires must
cross to meet the wiring diagram (see figure 29.28).
29 Put the mounting block in the back housing (see
figure 29.34)
figure 29.31: Positioning the copper wires and fibers
figure 29.32: Mounting block and back housing
A
B
A
B
R B
B R R
B
R B
R
B
= Red
= Brown
A
B
figure 29.33: Mounting block and back housing
figure 29.34: Mounting block/back housing assembly
A
B
A
B
B
B
R
B
R
R
B
R
R
B
= Red
= Brown