Filter
Top Products
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 9 | System Configuration en | 347
43.3.2 General
figure 43.11: Configure power amplifier, step 3
table 43.7: General configuration
Item Value Description
Mains power
supervision
On
Off
Specifies whether the mains power must be supervised.
When Mains power supervision is On and the mains
power is failing, a fault event is generated. Setting Mains
Power Supervision to Off when mains power is used,
results in a system that does not detect mains power
failures.
Back-up power
supervision
On
Off
Specifies whether the back-up power must be supervised.
When Back-up power supervision is On and the back-up
power is failing, a fault event is generated. Setting
Back-up power supervision to Off when back-up power is
used, results in a system that does not detect back-up
power failures.