Filter
Top Products
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 8 | Software en | 316
36.6 Clear logging events
After the system has been configured with the
configuration software (see chapter 40), the File Transfer
Application can be used to delete all logging events from
the network controller in order to deliver a system with
a clean logging database to the customer. Proceed as
follows:
1 Click the Clear logging button in the navigation bar. A
screen similar to the one in figure 36.10 appears.
2 If the fault events must be deleted from the network
controller, put a check mark in the Fault events check
box.
3 If the general events must be deleted from the
network controller, put a check mark in the General
events check box.
4 If the call events must be deleted from the network
controller, put a check mark in the Call events check
box.
5 Click the Apply button and restart the system to
delete the selected type of events from the network
controller.
figure 36.10: Clear logging