Filter
Top Products
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 11 | Optional Software en | 468
Server. The names of these items consist of the
configured name of the NCO and the zone name, using
the format <Network Controller name>_<Zone (group)
name>. This list is read-only; therefore the navigation
bar does not have Add, Delete and Copy to new buttons.
The bar is only used for navigation through the list.
The Network Controller and Zone (group) fields are
read-only text fields that show the name of the zone or
zone group that is currently selected and the network
controller where it is defined.
The Numerical alias field is a text field with a maximum
length of 16 digits that contains a number that should
uniquely identify the zone or zone group. The field only
accepts numbers (other characters are ignored when
typed) and may be left empty.
Even if the original zone (group) name was already
numerical, still the Numerical alias should be filled in.
59.5.4.11 Configure PC Telephone Interface Client
Users…
In this window the PC Telephone Interface Client users
can be configured and managed.
The Personal number (similar to a user name) should
uniquely identify the user, who wants to access the
Praesideo system with a telephone. Only numbers, up to
16 digits, are accepted. Each user with a personal
number must have a PIN code (similar to a password).
The PIN code may not be empty. This code can be
added or changed via the Change button. The maximum
length of the PIN code is 16 digits, all numerical.
Pressing the Select button brings up a selection window
to create a list of predefined calls for this user. This way
the access rights can be made different for different
users (callers). The user can only make calls via
telephone based on one of the predefined calls that are
configured for this user. Only predefined calls that have
been configured for use by the PC Telephone Interface
Client with a Numerical alias (see section 59.5.4.4) can be
selected.
59.5.4.12 Configure SIP Users…
In this window the SIP users of the PC Telephone
Interface Client, using a VoIP connection (Voice over
IP) can be configured and managed. SIP (Session
Initiation Protocol) is a communication protocol for
VoIP.
Enter the SIP user name for this SIP account; up to 20
alphanumerical characters are accepted. Then a
password should be added. A password can be added or
changed via the Change button. The maximum length of
the password is 16 alphanumerical characters. An
empty password is also allowed (i.e. no password).
This SIP user name and password should match those in
the PSTN configuration. See section 61.8.3. Checking
the checkbox Direct access allows the user of this SIP
account to access the Praesideo system without having
to enter a personal number and PIN code. Identification
is then based on the SIP user name (and password, if
entered).
In practice many different users may use the same SIP
account for access to the Praesideo system.
Differentiation between user rights is then best
accomplished by using the personal numbers and PIN
figure 59.18: PC Telephone Interface Client user
configuration
figure 59.19: SIP user configuration