Filter
Top Products
Bosch Security Systems | 2011-02
2011-02 | Installation and User Instructions | 5 | Call Stations en | 227
19.2 Controls, connectors and
indicators
The call station keypad kit (see figure 19.2) contains the
following:
X800 Control inputs - The control inputs are used
as replacement for the keys on the
LBB4432/00 Call Station Keypad (see
section 19.2.1).
X810 Control outputs - The control outputs are
used as replacement for the LEDs on the
LBB4432/00 Call Station Keypad (see
section 19.2.2).
S9 ID selector - A selector to identify the call
station keypad kit to the call station to which it
is connected (see section 19.2.4).
X5, X6 Keypad interface - The keypad interface is
used to connect up to 16 keypads to a (remote)
call station (see section 19.2.3).
X2 Jumper switch - Unused. However, the
jumper must be placed for correct operation.
figure 19.2: Component side
6
2
+
E
A
-
+
-
C
4
1
8
+
+
X811
S9
X2
X5
X6
X800
X810
3635
21
12
1516
12
1516
12
1516
..
.
.
.
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
.
Caution
Disconnect the system cable from the call
station (kit) and back-up supplies before you are
going to connect a keypad to it. Connecting a
keypad to a powered (remote) call station can
damage the (remote) call station.