Filter
Top Products
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 9 | System Configuration en | 346
43.3 Power amplifier
43.3.1 Procedure
Proceed as follows to configure a power amplifier:
1Go to Configure > Equipment configuration > Power
amplifier. A screen similar to the one in figure 43.9
appears in the main frame of the web interface.
2 Click the name of the power amplifier that must be
configured. A screen similar the one in figure 43.10
appears in the main frame of the web interface.
3Open the General category to configure the general
settings of the power amplifier (see section 43.3.2).
4Open the Audio inputs category to configure the
audio inputs of the power amplifier
(see section 43.3.3).
5Open the Audio outputs category to configure the
audio outputs of the power amplifier
(see section 43.3.4).
6Open the Control inputs category to configure the
control inputs of the power amplifier
(see section 43.3.6).
7 Open the Control outputs category to configure the
control outputs of the power amplifier
(see section 43.3.7).
8 Submit the changes. Note that the changes are not
permanent until the configuration is saved
(see section 40.4.4 and section 40.4.5).
figure 43.9: Configure power amplifier, step 1
figure 43.10: Configure power amplifier, step 2