Filter
Top Products
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | EN54-16: 2008 en | 34
7.9 Voice alarm condition output
(option with requirements)
Praesideo is compliant.
The VACIE may have provision for transmitting a signal that
is in the voice alarm condition. In this case, it shall activate
the output only in the voice alarm condition.
The Praesideo system transmits a signal that it is in the
voice alarm condition via control output contacts and the
Open Interface.
An output contact must be configured as voice alarm
activated indicator (Emergency alarm indicator). The
Praesideo system then activates the output contact when it
enters the voice alarm condition and deactivates the output
contact when it leaves the voice alarm condition (i.e. the
voice alarm condition is reset).
The Praesideo system also indicates this condition via the
Open Interface.
Clause / Requirement Compliance Signature