Filter
Top Products
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 6 | Installation Accessories en | 287
29.4.8 Installing the ferrules
Proceed as follows:
19 Insert a ferrule into the spring-loaded stop of the
POF positioning/crimping tool (tool 4, see
figure 29.21).
20 Lock the ferrule with the small lever (see
figure 29.22).
21 Insert a plastic optical fiber into the ferrule in the
spring-loaded stop of the POF positioning tool (see
figure 29.23).
22 Close the tool and open it again to crimp the ferrule
on the core of the fiber.
23 Repeat steps 19 to 22 for the other fiber in the cable.
The ferrules only have been crimped on the core of
the optical plastic fiber. Next, the ferrules are going
to be crimped on the sheaths of the fibers.
24 Put both ferrules in the crimping tool (tool 3, see
figure 29.24).
figure 29.21: Inserting a ferrule
figure 29.22: Locking a ferrule
figure 29.23: Crimping ferrules (1)
figure 29.24: Crimping ferrules (2)