Filter
Top Products
Emerson Process Management GmbH & Co. OHG2-18
X-STREAM X2
Instruction Manual
HASX2E-IM-HS
02/2012
Fig. 2-10: X-STREAM X2XF Field Housings - Power Supply Terminals / Fuse Holders
Signal inputs and outputs
All signal cables are connected to internal screw-type terminals located in the front
area of the opened housing (Fig. 2-11).
Cable cross-section: max. 1.5 mm
2
, end sleeves not required.
Cable entry via three IP 68 cable glands
Permissible cable outer diameter: 7–12 mm
Detailed terminal conguration 4.4.3 Installation, page 4-21.
Fig. 2-11: X-STREAM X2XF Field Housings - Signal Terminals
2.2.3 Model-Specic Technical Data: X-STREAM X2XF Field Housings
Note!
Depending on the actual analyzer conguration
not all shown terminals may be installed!
1 Ethernet
2 Analog & digital I/O terminal strips
3 Max. 4 signal cables entries
1 2 3
1 Power supply terminals with
fuse holders
2 Grounded conductor clamp (PE)
3 Power supply cable entry
3
2
1