Filter
Top Products
Emerson Process Management GmbH & Co. OHG 4-1
X-STREAM X2
Instruction Manual
HASX2E-IM-HS
02/2012
4
Installation
Chapter 4
Installation
This chapter describes the correct installation procedure for the various X-STREAM analyzer
versions.
On receipt, check the packaging and its contents thoroughly for damage.
Inform the carrier immediately of any damage to packaging or contents.
Store the instrument at a dry and clean place, considering the acceptable environmental con-
ditions. We recommend to keep the packaging available for returning the instrument in case of
failure, because only the original packaging ensures proper protection during transportation!
4.1 Scope of Supply
HAZARDS FROM MISSING INFORMATION
Compare the contents of your package with the pictures below.
Analyzers for hazardous areas need additional parts, described in the
accompanying documentation refering to hazardous area installations.
Call your local sales ofce if something is missing, and DO NOT continue
to install your analyzer, until all parts are at hand!
Analyzer
external power
supply unit with
DC power cable
(X2GK, option)
USB
stick
Fig. 4-1: X-STREAM X2 Analyzers - scope of supply
Manuals, some of which either as paper or
electronic version on USB stick:
• short form manual for general purpose
instruments
• X-STREAM X2 series manual
If applicable to your instrument
• special addendum manual for hazardous
area installations
• infallible containment instruction manual
Trace oxygen
cell
(if applicable)