Emerson Process Management GmbH & Co. OHG8-30
X-STREAM X2
Instruction Manual
HASX2E-IM-HS
02/2012
8.4 Troubleshooting on Components
Step 13:
Assemble the pump assy. Take
care of your marker ( step 4)
1. Put the two upper plates under
the clamp ( steps 6 & 7 for
reference).
2. Put the white block and the
new teon gasket between the
lower block and the in-outlet pla-
te.
Step 12:
Clean the white block.
Afterwards put in the new dia-
phragms and x them with the
new locking springs.
1
2