Emerson Process Management GmbH & Co. OHG 4-9
X-STREAM X2
Instruction Manual
HASX2E-IM-HS
02/2012
4
Installation
Plugs and sockets required for the electrical
connections are on the rear panel of the unit
(Fig. 4-5).
X-STREAM X2GK analyzers are powered
by an internal wide range power supply for
worldwide use, or by an external DC 24 V
power supply unit, optionally supplied with
the unit. If an external PSU is not included
in delivery, another unit can be used instead,
provided it conforms to the specications in
section 2.2.1.1 page 2-8.
X-STREAM X2GK analyzers should be ope-
rated in a horizontal position.
Six screws at the front panel enable to install
X2GK models into a rack. The external PSU
is optionally available for rack mounting, too.
4.6.1 X-STREAM X2GK
4.6.1 Installation - X-STREAM X2GK
Fig. 4-4: X-STREAM X2GK - front panel