Emerson Process Management GmbH & Co. OHG6-48
X-STREAM X2
Instruction Manual
HASX2E-IM-HS
02/2012
Save-Load
CfgData > SvcPort!
SvcPort > CfgData..
Verify!
6.2.3.8 Save-Load Menu
This line initiates the procedure for saving
conguration data to an external device: the
data are sent to the service interface (service
port X2).
This line initiates the procedure for restoring
conguration data: the data are loaded from
the service port.
CAUTION!
This overwrites all conguration data. Any
changes made since the last backup will be
undone.
Note!
This procedure requires a further conrmation
to start.
This line initiates the procedure for an online
comparison of the current conguration data
with the data stored via the service port.
The current conguration is not overwritten.
Downloaded data are deleted on completion
of this procedure.
6.2 Menu System - Save-Load Menu
Page 1
Note 1
Some of the following procedures require the
installation of terminal software on external
hardware (e.g. a PC connected to the service
interface) to store the data.
Note 2
During these procedures a message is dis-
played indicating how to abort the procedu-
re.
Setup..
Save-Load..
If the system is set up accordingly, the access
code for level 3 must be entered to gain ac-
cess to this menu.