Emerson Process Management GmbH & Co. OHG 8-37
X-STREAM X2
Instruction Manual
HASX2E-IM-HS
02/2012
8
Troubleshooting
8.4 Troubleshooting on Components
Step 1:
Check the solder bridges, lo-
cated at the solder side of the
board, for proper conguration:
LB10 open
LB4 2-5 closed
LB21 1-4 closed
LB20 open
Step 2:
Switch on the analyzer.
The onboard LED will light up red
and green.
LED
When the warmup time has
elapsed, the LED ashes green.
LED
LB21
LB4
LB20
LB10
LED