Emerson Process Management GmbH & Co. OHG 7-13
X-STREAM X2
Instruction Manual
HASX2E-IM-HS
02/2012
7
Maintenance & Procedures
7.4.1 Preparing Calibrations
The exemplary settings on the previous page
could relate to the following analyzer con-
guration:
Fig. 7-3: Internal Valves Assignments
The next step is to assign the internal valves
to the channels. If there are no external valves
to be controlled by your analyzer, continue
with 7.3.1.1.3 page 7-13.
valve block outlet
to measuring cell
internal valve
block
virtual
valve label
Sample
V1
V3
V2
gas ttings
at analyzer
rear side
tubings