Emerson Process Management HASX2E-IM-HS Carbon Monoxide Alarm User Manual


 
Emerson Process Management GmbH & Co. OHG4-14
X-STREAM X2
Instruction Manual
HASX2E-IM-HS
02/2012
4.6.1 Installation - X-STREAM X2GK
Power supply
24 VDC is supplied to the unit by means of a
three-pin XLR connector on the rear panel of
the instrument.
Depending on the order, the following is sup-
plied as an accessory: either
an external power supply unit which can
be connected directly to the analyzer using
the supplied cable
or
a connector which can be used with a
cable and PSU as specied by the cu-
stomer.
Note the conguration of the pins on the con-
nector (
Fig. 4-9, upper image).
Fig. 4-9: Power In Connectors
1: ME
2: + 24 V
3: 0 V ()
2 3 1
Details of any PSUs supplied with the unit are
given in
section 2.2.1.1, page 2-8ff.
AC power is supplied to the unit by means of
a three-pin IEC connector on the rear panel
of the instrument.
DC supply
AC supply