Filter
Top Products
Emerson Process Management GmbH & Co. OHG6-2
X-STREAM X2
Instruction Manual
HASX2E-IM-HS
02/2012
6.1 Symbols Used
6.1 Symbols Used
OthersSymbols used in this section
Symbol Description
Within Process Descriptions
Setup..
Menu title
Setup..
Analog outputs..
Upper level (Setup) and
current menu (Analog out-
puts)
Analog outputs..
Output1 (2...4)
The menu illustrated here
for Output1 is the same as
for Output2 through Out-
put4
Zero calibration..
Span calibration..
Adv. calibration..
Apply gas..
Display
Note!
Menus or lines on grey back-
ground are optional or de-
pendent on context, and so
may not always be displayed.
Menu access:
Level 1
(User)
Level 2
(Expert)
Level 3
(Administrator)
Level 4
(Service level)
Convention Description
Within Text
(MENU TITLE)
6.2.2, page 6-12
For a detailed description
of the Menu, see section
6.2.2 on page 6-12.
CONTROL.. - ZOOM..
From within the CONTROL
menu select the ZOOM
menu.
“Valves”
Parameter name
Never, 1 min
Values to be selected
0 ... 2000
Value to be entered
In the following sections, the symbols and
typographical conventions described below
are used to describe the software menus and
navigation.