Filter
Top Products
Emerson Process Management GmbH & Co. OHG 8-5
X-STREAM X2
Instruction Manual
HASX2E-IM-HS
02/2012
8
Troubleshooting
Message
Status level
Explanation
Description Actions
Calibration
Function check
Explanation:
Calibration active
Currently a calibration proce-
dure is ongoing
Wait for calibration to nish
Cancel calibration
SvcPort > Cf
Function check
Explanation:
SVC port in use
Instrument is currently con-
gured via service interface
Wait for data transfer to nish
SVC port is in pass through
mode
Switch back to normal com-
munication mode
Unlinear
Off-spec
Explanation:
This message does not
appear during operation
modes!
Instrument has been set to
"unlinear mode" by service
personnel (see "simulation")
Switch off diagnostic mode
(Modbus command)
8.2.1 Analyzer related messages