Filter
Top Products
Emerson Process Management GmbH & Co. OHG6-18
X-STREAM X2
Instruction Manual
HASX2E-IM-HS
02/2012
Code 1: Off
Code 2: Off
Code 3: Off
Activate On
Code 1: 00000001
Code 2: 00000002
Code 3: 00000003
6.2.3.1.2 Menu Access Setup
Lines 1 to 3 determine whether the correspon-
ding access level is locked:
Off: Menu access not locked.
On: Access code must be entered to gain
access to the corresponding menus (code 3 =
level 3, ..).
Note!
If a lower level is locked, all higher levels will
also be locked.
If a higher level is unlocked, all lower levels
will also be unlocked.
If the system is set up accordingly, the access
code for level 3 must be entered to gain ac-
cess to this menu.
6.2 Menu System - Display Setup Menu
Determines how unlocked menus are re-
locked to restore security settings.
Available options:
On
: all levels with active security code
are locked on return to the
measurement display
1 min: Levels are locked after 1 minute of
inactivity.
Never: Menus remain unlocked.
Note!
Executing the “Lock menus!” function in the
CONTROL menu (
6.2.2, pg. 6-5), sets
all active locks.
Denes access codes for the corresponding
levels.
The illustration shows the factory settings.
Setup..
Display..
Menu access..
Page 2
Page 1
When using access codes, we
recommend NOT using the
factory-set codes.