Filter
Top Products
Emerson Process Management GmbH & Co. OHG 4-15
X-STREAM X2
Instruction Manual
HASX2E-IM-HS
02/2012
4
Installation
The brackets either side of the front panel
enable the unit to be mounted in a rack; this
is accomplished by means of four screws
(Fig. 4-10).
X-STREAM X2GP analyzers should be ope-
rated in a horizontal position.
4.6.2 X-STREAM X2GP
This model is tted with plugs and sockets
as standard for electrical connections. They
are located at the rear of the instrument (Fig.
4-11).
Optionally, adapters are available which
can be mounted on the signal connectors to
enable signal cables to be connected using
screw-type terminals (Fig. 4-12).
4.6.2 Installation - X-STREAM X2GP
Fig. 4-10: X-STREAM X2GP - front view
Screw holes for rack mounting
(7.5 x 10.5 mm)