Filter
Top Products
Emerson Process Management GmbH & Co. OHG2-14
X-STREAM X2
Instruction Manual
HASX2E-IM-HS
02/2012
Fig. 2-6: X-STREAM X2GP - Power Supply and Signal Connections
Signal inputs and outputs
As standard, signal cables are connected
using Submin-D plugs or sockets on the
unit’s rear panel (except Ethernet: RJ45 so-
cket)(
Fig. 2-6)
Detailed terminal conguration
Instal-
lation, page 4-15.
1 Power connector
2 Fuse holder
3 Power switch
4 Signal connectors
(some optional)
31 2
4
2.2.2 Model-Specic Technical Data: X-STREAM X2GP
Optionally, adapters can be plugged onto the
Submin-D connectors to enable signal cables
to be connected via screw-type terminals. In
this case, an additional strain relief bracket
for the signal cables is mounted on the rear
panel (
Fig. 2-7):
Fig. 2-7: X-STREAM X2GP - Signal Connections With Screw-Type Terminal Adapters (top View)
1 Strain relief with cable shield
grounding clamps (quantity varies
depending on installed options)
2 Terminal adapters
1 2
Terminal adapters (detail)