Emerson Process Management GmbH & Co. OHG6-24
X-STREAM X2
Instruction Manual
HASX2E-IM-HS
02/2012
Calibration gases
ZeroGas: 0.0 ppm
SpanGas: 500.0 ppm
6.2 Menu System - Calibration Setup
6.2.3.2.1 Calibration Gases Menu
Setup..
Calibration..
Calibration gases..
The concentration of the zero gas used for
calibration is entered here.
The concentration of the span gas used for
calibration is entered here.
Note!
Units for calibration gas concentrations are
take from the corresponding entry in the dis-
play setup menu.
Multi-channel unit:
Select the component to be set in the SELECT
COMPONENT menu.
Multi-channel unit:
Press the key to enter the SELECT COM-
PONENT menu to change the settings for a
different channel.