Filter
Top Products
Emerson Process Management GmbH & Co. OHG 6-53
X-STREAM X2
Instruction Manual
HASX2E-IM-HS
02/2012
6
Software Menus
6.2.4.3 Function Checks
Status..
1 Function checks..
6.2 Menu System - Status Menu
The number in the “Function checks” line in
the previous menu indicates how many errors
are currently active (here: 1). In the following
menus, Yes is displayed in the correspondung
number of lines.
For more details on function checks,
Chapter 8 Troubleshooting.
Note!
If one or more function check messages are
active, the middle LED on the front panel
ashes red. The corresponding relay is also
activated, if configured for NAMUR error
messages.
(e.g.: a calibration is currently in progress)
LocalAccess No
Simulation No
Page 2
Calibration Yes
SvcPort > Cf No
NotSampleGas No
Warm-up No
Page 1