Filter
Top Products
Emerson Process Management GmbH & Co. OHG7-60
X-STREAM X2
Instruction Manual
HASX2E-IM-HS
02/2012
7.7.3 Copy FactData to CfgData
7.7. Save / Restore Conguration Data Sets
2
nd
menu page
FactData > CfgData..
CfgData > UserData..
UserData > CfgData..
Save-Load
CfgData > SvcPort!
SvcPort > CfgData..
Verify!
1
st
menu page
If system is setup accordingly, access level 3
code must be entered to gain access to this
menu.
Now select the "FactData>CfgData.." line and
press the ENTER key.
Press the DOWN key to open the second
menu page.
FactData>CfgData
Are you sure?
No!
Yes!
A screen appears to conrm the operation:
Select Yes! and after pressing the ENTER
key a new screen comes up showing the
current status.
The instrument now replaces the currently
used (and changed by operator) analyzer se-
tup by the FactData set. All settings changed
by the operator will be overwritten and the
instrument setup to the factory settings.
When the procedure has nished, the COM-
MAND EXECUTED screen shows up for 2
seconds, followed by...
(i)
-COMMAND EXECUTED-
FactData > CfgData..
CfgData > UserData..
UserData > CfgData..
... the previous menu page. After a few se-
conds the analyzer automatically starts to
reboot.
Setup..
Save-Load..
Starting at the measurement screen press the
DOWN key to open the MAIN MENU, enter
the SETUP and next the SAVE-LOAD.. menu.